AH-10

AH Series Single-phase Dual-stage EMI Filters These series range of double stage filters give superior performance when used in applications with low Impedance loads controlling pulsed, continuous and inter- mittent interference noise and where high levels of mains borne interference are present. SerieS SpeciFicA tionS FeA tureS Rated Leakage Standard current current (mA) Termination Weight Double stage filter Part No. @40C @250VAC/50Hz Tab Screw (kg) Medical Version available AH-01 1A 0.34 6.3 x 0.8 0.125 Superior Per formance AH-02 2A 0.34 6.3 x 0.8 0.125 AH-03 3A 0.34 6.3 x 0.8 0.17 Chassis mounting AH-06 6A 0.34 6.3 x 0.8 0.17 AH-10 10A 0.34 6.3 x 0.8 0.17 ApplicA tionS AH-15 15A 0.34 6.3 x 0.8 0.26 Power Systems AH-20 20A 0.73 M5 0.65 Electronic Equipment AH-25 25A 0.73 M5 0.65 AH-30 30A 0.73 M5 0.65 Frequency convertors AH-35 35A 0.73 M5 1 Stepper motor drives AH-40 40A 0.73 M5 1 AH-50 50A 0.73 M6 2 UPS/Inverters cHArActeriSticS inSertion loSS Max. Cont. Oper. Voltage 250VAC -10 Operating Frequency 50/60Hz -20 Current ratings 1A to 50A @40C -30 High Potential test voltage L to G 2120Vdc for 1 Minute; L to L 1414Vdc for 1 Minute -40 Design corresponding to UL 60939-3, CSA 22.2 -50 No.8-13 and IEC 60939 -60 1A Overload Capability 135% of Rated current for 15 minutes -70 2A 3A Flammability corresponding to UL 94 V-0 -80 6A 10A -25C to +85C Temperature range -90 15A Climatic Category 25/85/21 Start 30.00kHz Stop 30.00MHz Recommended Torque (Nm) M5: 1.0-2.0; M6: 1.25 2.5; M8: 2.5-5; M10: 3.5-7 -10 LC1 LC2 -20 L L' -30 L Cy L Cx Cx E -40 I O R N A -50 E D Cy -60 20A -70 25A N' N 30A -80 35A 40A -90 50A Start 30.00kHz Stop 30.00MHz (continued) 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info@ohmite.com 1AH Series Single-phase Dual-stage EMI Filters dimenSionS All dimensions in mm; Tolerances according to ISO2768-m 80 35A & 40A 5x6.2 1A & 2A 60.5 .2 73.5 .5 51 .3 100 .5 115 .25 130 27.5 .3 45 .3 6.3x0.8 4 8 50 .5 3A to 10A 75 .2 5 51 1 120 .5 64 33.5 .5 6.3x0.8 120 50A 85 .5 135 .25 120 15A 150 75 .2 5 51 1 4 39 1 62 8 70 .5 6.3x0.8 85 .5 9.35 20A to 30A 180 .5 78.5 86 .5 107 96.5 .3 40 1 46.5 7 100 .5 orderinG inFormA tion Standard AH-02 part numbers Series Current AH-01 AH-20 rating AH-02 AH-25 AH-03 AH-30 AH-06 AH-35 AH-10 AH-40 AH-15 AH-50 rev 05/20-1 2 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info@ohmite.com