PSA24A-120(P) Phihong

WWW.PHIHONG.COM 24 Watt Wall Plug Adapter PSA24A-120(P) Adapter Meets EISA and CEC Requirements Features Class B EMI Class II Double Insulated No Load Power Consumption <0.3W EISA and CEC Compliant Short-Circuit Protection Over-Voltage, Over-Current Protection Applications Portable Equipment Access Devices Peripherals Safety Approvals cUL/UL BSMI Mechanical Characteristics Length: 83.5mm (3.29in) Height: 73.5mm (2.89in) Width: 35.0mm (1.38in) Weight: 165g (5.82oz) Output Specifications Load Ripple Regulation Efficiency DC Output Model Voltage Min. Max. P-P (max.) Line & Load Level PSA24A-120(P) 12V 0A 2.0A 150mV 5% (1) Measured after 30 minutes with by-pass capacitors 0.1uF/10uF at output connector terminal and oscilloscope set at 20MHz. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 11/21/2011 PSA24A Characteristics WWW.PHIHONG.COM Input: Over-Voltage Protection Output Voltage shall not exceed 20V AC Input Voltage Rating 100 to 240V AC Over-Current Protection 5.0A maximum at 230V AC AC Input Voltage Range 90 to 264V AC Short-Circuit Protection Output can be shorted permanently without damage AC Input Frequency 50 to 60Hz Environmental: Input Current Temperature 0.6A (RMS) maximum at 100V AC Operation 0 to +40C Non-operation -40 to +85C Humidity 10 to 90% Leakage Current 0.25mA maximum Emissions FCC Class B Inrush Current EN55022 Class B 85A maximum at 230V AC (Cold start at ambient 25C) Immunity EN50082-1: (EN55024) Input Power Saving EN61000-4-2 Level 4 0.3W maximum at no load EN61000-4-5 Level 2 Output: Dielectric Withstand (Hi-pot) Test Efficiency Primary to Secondary: 3000V AC for 1 min., 10mA 80% average efficiency DC Output Connector Hold-up Time 2.1 x 5.5mm Center Positive Barrel 8mS minimum at maximum load and 120V AC Dimension Diagram Unit: mm (inch) Type text