17-1724-2 Eaton

Plated Plastic Backshell ACCESSORIES SPECIFICATIONS: Housing Material: ABS Polymer Plating: Nickel over copper Grommet Material: PVC (UL 94 VO) Mounting Hardware: Steel, clear zinc nish ASSEMBLY INSTRUCTIONS 1. Select the tightest insert that will t over the cable and thread the cable through it, placing the end with the smaller O.D. (the end without the washer) towards the connector. 2. Cut the jacket, fold the shielding back over the outside of the insert Amphenols plated plastic backshell and cut it just short of the washer. accommodates most standard and 3. Install jackscrews and connector. high-density D-Subminiature 4. Place the washer in the outermost depression in the exit area connectors and is appropriate of the hood and screw the cover closed. for cable assemblies requiring compliance to FCC 20780. This version is highly durable and provides EMI/RFI protection. The rubber grommet compression insert forces the cables shielding against the inside of the cable exit area, assuring shielding. DIMENSIONS AND ORDERING INFORMATION Shell Standard Hi-Density Part Dimensions Cable Diameter Range Size of Contacts of Contacts A B C D E F Minimum Maximum 1.217 1.547 0.640 0.640 0.400 0.984 0.210 0.320 E 9 15 17-1724-2 (30.91) (39.29) (16.26) (16.26) (10.16) (24.99) (5.33) (8.13) 1.545 1.505 0.640 0.640 0.400 1.312 0.210 0.320 A 15 26 17-1725-2 (39.24) (38.23) (16.26) (16.26) (10.16) (33.32) (5.33) (8.13) 2.000 1.655 0.710 0.640 0.522 1.857 0.230 0.450 B 25 44 17-1726-2 (50.8) (42.04) (18.03) (16.26) (13.26) (47.17) (5.84) (11.43) 2.730 1.830 0.906 0.640 0.726 2.500 0.350 0.650 C 37 62 17-1727-2 (69.34) (46.48) (23.01) (16.26) (18.44) (63.50) (8.89) (16.51) 2.645 1.855 0.940 0.440 0.726 2.406 0.350 0.650 D 50 78 17-1728-2 (67.18) (47.12) (23.88) (11.18) (18.44) (61.11) (8.89) (16.51) INCHES (MM) 58 TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES AMPHENOLCANADA.COM