MPC5777C-516DS

Document Number: NXP Semiconductors MPC5777CEVBUG Users Guide Rev. 1, 03/2019 MPC5777C EVB User Guide Prototype Board by: NXP Semiconductors Contents 1. Introduction 1. Introduction ..................................................................... 1 This user guide details the setup and configuration 2. EVB Features ................................................................. 2 of the NXP MPC5777C Evaluation Board (hereafter referred to as the EVB). The EVB is 3. Configuration Motherboard ........................................ 3 intended to provide a mechanism for easy 4. Configuration MPC5777C-416DS Daughter card .... 13 customer evaluation of the MPC57xx family of 5. Configuration MPC5777C-516DS Daughter card .... 27 microprocessors, and to facilitate hardware and 6. Board Interface Connector ........................................... 41 software development. 7. Default Jumper Summary Table ................................... 55 8. List of Acronyms ........................................................... 58 At the time of writing this document, the MPC57xx family consists of the 55nm powertrain and safety devices. For the latest product information, please speak to your NXP representative or consult the MPC57xx website at www.nxp.com The EVB is intended for bench or laboratory use and has been designed using normal temperature specified components (+70C). Introduction 1.1 Modular Concept For maximum flexibility and simplicity, the EVB has been designed as a modular development platform. The EVB main board does not contain an MCU. Instead, the MCU is fitted to an MCU daughter card (occasionally referred to as an adapter board). This approach means that the same EVB platform can be used for multiple packages and MCU derivatives within the MPC57xx family. High density connectors provide the interface between the EVB and MCU daughter cards as shown Figure 1 See Section 4&5, Configuration MPC5777C-516DS Daughter card for more details on the daughter cards and Section 6, Board Interface Connector for more details on the interface connectors. Figure 1: Modular concept Mother Board (MB) and MCU daughter card Please consult the MPC57xx website at www.nxp.com or speak to your NXP representative for more details on the availability of MCU daughter cards. The EVB is designed to be used with the motherboard and standalone configurations NOTE For details on your specific daughter card, please consult the instructions included with the daughter card. 1.2 Daughter Card Availability A number of compatible daughter cards are available for the motherboard across a number of devices. Table 1 gives an overview of daughter cards that can be used with MPC57xx motherboard (Part Number: MPC57XXXMB) and associated MPC5777C devices, package sizes and part numbers. Table 1: Daughter Card Overview Daughter card number Device Package Socket Nexus MPC5777C-416DS MPC5777C 416 BGA Yes Yes MPC5777C-516DS MPC5777C 516 BGA Yes Yes All daughter cards will be similar in design and concept. For details on the daughter cards please refer to Section 4&5, Configuration MPC5777C-416DS Daughter card, Configuration MPC5777C-516DS Daughter card. 2. EVB features MPC5777C EVB User Guide, Rev. 1 2 NXP Semiconductors