PTN5100 USB Type-C power delivery PHY and protocol IC Rev. 1.1 25 July 2017 Product data sheet 1. General description PTN5100 is a single port USB Type-C Power Delivery (PD) PHY and Protocol IC that provides Type-C Configuration channel interface and USB PD Physical and Protocol layer functions to a System PD Port Policy Controller (Policy Engine and Device Policy Manager, Alternate mode controller). It complies with USB PD 1 and Type-C 2 specifications and delta updates of PD spec. This IC is targeted for a wide range of platforms (Standard Notebook PCs, Desktop PCs, Chromebooks, Tablets, Convertibles, Smart phones) and PC Accessories (e.g. Docks, Monitors, Cable adapters etc.) applications. PTN5100 is architected to deliver robust performance, compliant behavior, configurability and system implementation flexibility that are essential to tide over interoperability and compliance hurdles in the platform applications. PTN5100 can support system realization of the following PD roles: (i) Provider (P) only, (ii) Provider/Consumer (P/C) (iii) Consumer only (C) (iv) Consumer/Provider (C/P). Further, it can be register programmed to operate in Type-C specific Upstream Facing Port (UFP), Downstream Facing Port (DFP) or Dual Role Port (DRP) role. PTN5100 implements VCONN low RON switch with register programmable Forward Current protection feature. The VCON switch also provides Reverse current protection feature to detect reverse current flow into the system whenever (inductive or) charged cable is unplugged from the connector. PTN5100 operates from platform power supply VDD, or it can also be powered from USB power VBUS directly, which is especially required for operation under Dead Battery (DB) condition and certain platform use cases. The host interface operates on VIO supply to facilitate interfacing to systems that use IO supply rail different from VDD supply rail. It provides SPI/I2C interface for system host control/status update. The interface choice is pre- configured in NXP factory. PTN5100 is available in a small footprint package option: HVQFN20 4 mm x 4 mm, 0.5 mm pitch. Remark: 1. The term EC is used interchangeably with Embedded Controller , AP , Application Processor or System Management Controller, SMC or System Host Controller throughout this document. 2. The terms PMIC , Power Management Interface Controller , Charger IC are used interchangeably throughout this document.PTN5100 NXP Semiconductors USB Type-C power delivery PHY and protocol IC 2. Features and benefits 2.1 USB PD and Type-C Features Complies with USB PD 1 and USB Type-C 2 specifications. Supports implementation of various system PD roles: P, P/C, C, C/P Supports Type-C role configurability Type-C role (DFP, UFP, DRP) is Non-Volatile Memory (NVM) and register programmable based on OEM platform requirements Implements UFP role pull down behavior to handle dead battery condition on battery powered platforms Supports register programmable and variable Rp indication (for DRP/DFP usage and accessory detection) Implements Rd indication on CC pin (for Device side implementation) CC detection/indication scheme based on Type-C role Indication of orientation detection via CC ORIENT pin and status register(s) Debug and Audio Accessory detection and indication in status register(s) Cooperatively works under the control of Policy controller MCU for power delivery negotiation and contract(s), Alternate mode and VDM exchanges Implements BMC (de)coding, 4B5B symbol (de)coding, CRC generation/checking, PD packet assembling/disassembling including Preamble, SOP, EOP, Good CRC response, Retries, Hard and Cable resets PD PHY and Protocol layer interface control and status update handled via SPI/I2C interface SOP* Configurability Register programmable to generate and receive SOP, SOP , SOP -debug, SO, SO-debug in DFP/DRP (host use case) Register programmable to receive and respond on SOP, SOP -debug and SO-debug commands Supports low RON VCONN switch with enable/disable (Hi-Z) support Capable of maximum current delivery of 1 A over 2.7 V to 5.5 V Supports register programmable Forward current protection control Supports register programmable Reverse current protection 2.2 System protection features Back current protection on all pins when PTN5100 is unpowered CC1 and CC2 pins are 5.5 V tolerant VBUS pin and VBUS power path MOSFET enable pins are 28 V tolerant 2.3 General Delivers (active LOW enable) gate control signals for PMOS Power MOSFETs on VBUS source and sink power paths Provides dedicated IO pin (CC ORIENT) for indicating Cable/plug orientation and IO pin (DBGACC FOUND) for indicating Debug accessory detection Delivers up to 30 mA (max) for powering Policy controller MCU Supports SPI slave interface (SPI modes 1 and 2 supported) up to 30 MHz PTN5100 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2017. All rights reserved. Product data sheet Rev. 1.1 25 July 2017 2 of 53