SL2MOS5101EV,118 NXP

SL2 ICS50/SL2 ICS51 ICODE SLI-L/ICODE SLI-L HC Rev. 3.0 14 March 2007 Product data sheet 136430 PUBLIC 1. General description The ICODE SLI-L/ICODE SLI-L HC IC is a dedicated chip for smart label applications with the need for a leaner custom-specific command set, smaller memory and/or a product which takes care of the increasing demand for perfect customer privacy. This IC is another member of our product family of smart label ICs that fully comply to the ISO standard ISO/IEC 15693. The IC is also available in high capacitance version for small label designs. The ICODE system offers the possibility of operating more than one label simultaneously in the field of the reader antenna (Anticollision). It is designed for long range applications with a special command for the use under the European regulations. 1.1 Anticollision An intelligent anticollision function allows to operate more than one tag in the field simultaneously. The anticollision algorithm selects each tag individually and ensures that the execution of a transaction with a selected tag is performed correctly without data corruption resulting from other tags in the field. 1.2 Contactless energy and data transfer Whenever connected to a very simple and cheap type of antenna (as a result of the 13.56 MHz carrier frequency) made out of a few windings printed, winded, etched or punched coil the ICODE SLI-L/ICODE SLI-L HC IC can be operated without line of sight up to a distance of 1.5 m (gate width). No battery is needed. When the smart label is positioned in the field of an interrogator antenna, the high speed RF communication interface allows to transmit data with up to 53 kbit/s.NXP Semiconductors SL2 ICS50/SL2 ICS51 ICODE SLI-L/ICODE SLI-L HC PUBLIC 1.3 Security and privacy aspects 1. Unique Identifier (UID) The UID can not be altered and guarantees the uniqueness of each label. 2. Password protected Label Destroy With the 32-bit destroy password an addressed label can be destroyed with the Destroy command. That status is irreversible and the label will never respond to any command again. 3. Password protected Privacy Mode With the 32-bit Privacy password a label can be set to the Privacy mode with the Set to Privacy Mode command. In that mode the label will not respond to any command except of the command Get Random Number till it receives again the right Privacy password. That mode is especially designed to meet the increasing demand to take care of the customers privacy. 4. Password protected EAS Functionality With the 32-bit EAS password the addressed label can be set in a mode that the commands Set EAS and Reset EAS are only executed by the label if the right EAS password is transmitted to the label within the mentioned commands. 136430 NXP B.V. 2007. All rights reserved. Product data sheet Rev. 3.0 14 March 2007 2 of 28