TEA1713T Resonant power supply control IC with PFC Rev. 2 9 February 2011 Product data sheet 1. General description The TEA1713 integrates a Power Factor Corrector (PFC) controller and a controller for a Half-Bridge resonant Converter (HBC) in a multi-chip IC. It provides the drive function for the discrete MOSFET in an up-converter and for the two discrete power MOSFETs in a resonant half-bridge configuration. The efficient operation of the PFC is achieved by implementing functions such as quasi-resonant operation at high power levels and quasi-resonant operation with valley skipping at lower power levels. OverCurrent Protection (OCP), OverVoltage Protection (OVP), and demagnetization sensing ensure safe operation under all conditions. The HBC module is a is a high-voltage controller for a zero-voltage switching LLC resonant converter. It contains a high-voltage level shift circuit and several protection circuits including OCP, open-loop protection, capacitive mode protection and a general purpose latched protection input. The high-voltage chip is fabricated using a proprietary high-voltage Bipolar-CMOS-DMOS power logic process that enables efficient direct start-up from the rectified universal mains voltage. The low-voltage Silicon On Insulator (SOI) chip is used for accurate, high-speed protection functions and control. The topology of a PFC circuit and a resonant converter controlled by the TEA1713 is very flexible, enabling it to be used in a broad range of applications with a wide mains voltage range. Combining PFC and HBC controllers in a single IC makes the TEA1713 ideal for controlling power supplies in LCD and plasma televisions. Highly efficient and reliable power supplies providing over 100 W can be designed easily using the TEA1713, with a minimum of external components.TEA1713T NXP Semiconductors Resonant power supply control IC with PFC 2. Features and benefits 2.1 General features Integrated PFC and HBC controllers Universal mains supply operation (70 V to 276 V (AC)) High level of integration resulting in a low external component count and a cost effective design Enable input (enable only PFC or both PFC and HBC controllers) On-chip high-voltage start-up source Stand-alone operation or IC supplied from external DC source 2.2 PFC controller features Boundary mode operation with on-time control Valley/zero voltage switching for minimum switching losses Frequency limiting to reduce switching losses Accurate boost voltage regulation Burst mode switching with soft start and soft stop 2.3 HBC controller features Integrated high-voltage level shifter Adjustable minimum and maximum frequency Maximum 500 kHz half-bridge switching frequency Adaptive non-overlap time Burst mode switching 2.4 Protection features Safe restart mode for system fault conditions General latched protection input for output overvoltage protection or external temperature protection Protection timer for time-out and restart Overtemperature protection Soft (re)start for both controllers Undervoltage protection for mains (brownout), boost, IC supply and output voltage Overcurrent regulation and protection for both controllers Accurate overvoltage protection for boost voltage Capacitive mode protection for HBC controller 3. Applications LCD television Plasma television Adapters TEA1713T All information provided in this document is subject to legal disclaimers. NXP B.V. 2011. All rights reserved. Product data sheet Rev. 2 9 February 2011 2 of 47