Data Sheet PS9351L, PS9351L2 R08DS0127EJ0100 HIGH NOISE REDUCTION, 15 Mbps CMOS OUTPUT TYPE Rev.1.00 Apr 24, 2015 8mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER DESCRIPTION The PS9351L and PS9351L2 are optically coupled isolator containing a GaAlAs LED on the input side and a CMOS output IC on the output side. The PS9351L and PS9351L2 are in 6-pin plastic SDIP (Shrink Dual In-line Package). The PS9351L2 has 8 mm creepage distance. The mount area of 6-pin plastic SDIP is half size of 8-pin DIP. This photocoupler is high common mode transient immunity (CMR), a high-speed CMOS output type device designed for high-speed logic interface circuits. The PS9351L is lead bending type (Gull-wing) for surface mounting. The PS9351L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES PIN CONNECTION High-speed response (15 Mbps) (Top View) Long creepage distance (8mm MIN. : PS9351L2) 645 Operable at high temperature (40 to +100C) High common mode transient immunity (CM , CM = 20 kV/s TYP.) H L 1. Anode High isolation voltage (BV = 5000 Vr.m.s.) 2. NC 3. Cathode Pulse width distortion ( t t = 5 ns TYP.) PHL PLH 4. GND Ordering number of tape product : PS9351L-E3: 2,000 pcs/reel 5. VO : PS9351L2-E3: 2,000 pcs/reel 6. VDD Pb-Free product Safety standards 132 UL approved : No. E72422 CSA approved : No. CA 101391 (CA5A, CAN/CSA-22.2 60065, 60950) DIN EN 60747-5-5 (VDE0884-5) approved (Option) TRUTH TABLE APPLICATIONS LED Output FA Network ON L Measurement equipment OFF H PDP R08DS0127EJ0100 Rev.1.00 Page 1 of 13 Apr 24, 2015 SHIELDPS9351L, PS9351L2 PACKAGE DIMENSIONS (UNIT: mm) Lead Bending Type (Gull-wing) For Surface Mount PS9351L 4.580.3 (0.82) 9.70.3 7.62 1.27 0.80.25 0.40.1 0.25 M Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount) PS9351L2 4.580.3 (0.82) 11.50.3 7.62 1.27 0.750.25 0.40.1 0.25 M R08DS0127EJ0100 Rev.1.00 Page 2 of 13 Apr 24, 2015 3.70.25 3.70.25 3.50.2 3.50.2 6.80.25 6.80.25 0.20.15 0.20.15 0.250.15 0.250.15